中国主要背景区域冬季大气PM2.5中非极性有机化合物组成及来源解析

本研究于2019年12月至2020年1月在5个区域大气本底站：临安、金沙、龙凤山、上甸子和瓦里关,同步采集了PM_2.5样品,分析了其中的非极性有机物：多环芳烃、正构烷烃和藿烷类化合物。结果表明,上甸子和龙凤山的多环芳烃平均浓度显著高于其他站点,分别为35.2±25.6 ng/m³和27.5±16.8 ng/m³;藿烷类物质的浓度在上甸子和临安出现高值,分别为2.72±1.78 ng/m³和2.47±0.990 ng/m³;正构烷烃浓度以临安最高,为86.7±40.6 ng/m³。对各站点多环芳烃和藿烷类化合物采用比值法,正构烷烃采用主峰碳数（C_max）、碳优势指数（carbon preference index,CPI）和植物蜡贡献率（% Wax C_n）,结合主成分分析-多元线性回归模型（PCA/MLR）综合进行源解析。结果显示采样期间除瓦里关外,其余站点燃烧源均以化石燃料源为主,贡献率分别为临安（94.9%） > 金沙（75.3%） > 龙凤山（74.7%） > 上甸子（62.5%） > 瓦里关（35.6%）。后向轨迹聚类分析（HYSPLIT）和潜在源贡献因子分析法（PSCF）表明各站点主要受到外来传输气团的影响,并查明了各站点的潜在污染源区。对背景站点的研究表明,东北地区和京津冀地区PM_2.5中非极性有机物来源相似,京津冀地区的生物质燃烧源贡献率高于东北地区;长江中下游地区化石燃料贡献率显著高于生物质燃烧;华中地区燃煤和交通排放源排放贡献率均低于长江三角洲地区;青藏高原地区生物质燃烧贡献率远高于其他地区。     

China's Grain for Green Program has reduced soil erosion in the upper reaches of the Yangtze River and the middle reaches of the Yellow River

Severe soil erosion in the upper reaches of the Yangtze River and the middle reaches of the Yellow River is a serious environmental problem in western China. In order to control this soil erosion, the national government implemented the Grain for Green Program (GGP) in Sichuan Province (in the upper reaches of the Yangtze River) and Shaanxi Province (in the middle reaches of the Yellow River) in 1999. To evaluate the effects of the GGP on soil erosion, the present study investigated the relationships between annual precipitation and three parameters, annual runoff, sediment concentration, and sediment discharge, for these rivers. As the area covered by the GGP increased, sediment concentration and sediment discharge both decreased, and the correlation with the GGP area was much stronger than the correlation with annual precipitation. Therefore, China's GGP appears to be controlling soil erosion in the upper reaches of the Yangtze River and the middle reaches of the Yellow River.     

电气浮-光催化氧化对微污染原水中腐植酸的去除研究

运用电气浮-粉末TiO2光催化组合工艺,对微污染原水进行实验研究。在降解腐植酸的静态实验中,开启光强为2×10 W紫外杀菌灯,电压20 V,电流0.4 A,两组极板间距0.5 cm,粉末TiO2投加量1 g/L,反应时间为150 min时,CODMn去除率达87.8%。实验表明:电气浮与光催化氧化联合使用时,可取得较好的协同效果。     

Photocatalytic energy storage ability of TiO2-WO3 composite prepared by wet-chemical technique

TiO2-WO3 hybrid photocatalysts were prepared using wet-chemical technique, and their energy storage performance was characterized by electrochemical galvanostatic method. TiO2 powder was coupled with WO3 powder, which was used as electron pool and the reductive energy could be stored in. As a result, the prepared TiO2-WO3 had good energy storage ability while pure TiO2 showed no capacity and pure WO3 showed quite low performance. The energy storage ability was affected by the crystal structure of WO3 and ca...     

Geostatistical analysis on the spatial pattern of Pinus tabulaeformis population at different habitats in the Lingkong Mountain北大核心CSCD

In order to reveal the distribution pattern and spatial correlation of Pinus tabulaeformis population, this research used geostatistical theory and methods to examine the distribution pattern and spatial correlation of P. tabulaeformis population in different habitats of the Lingkong Mountain. The results showed that the semivariograms well fitted the exponential model for P. tabulaeformis populations at the mountain ridge, and the spherical model for those in slow slopes and valley areas. All three populations showed aggregated pattern. The spatial heterogeneity of the habitats of ridge, slow slope and valley was mostly due to the spatial autocorrelation in the ranges of 11.16 m, 9.99 m and 4.74 m, respectively. The populations at the ridges and gentle slopes showed greater sill values and determinant coefficient but lower fractal dimension than the pines in valleys, indicating that the first two habitats are characterized by higher degree of spatial heterogeneity and more significant spatial patterns, which is not found in the valley populations. Therefore the variations in the spatial distribution patterns of P. tabulaeformis populations is likely resulted from both the intrinsic biological characteristics and the environmental factors.     

Molecular diversity of arbuscular mycorrhizal fungi at a large-scale antimony mining area in southern China

Arbuscular mycorrhizal fungi (AMF) have great potential for assisting heavy metal hyperaccumulators in the remediation of contaminated soils. However, little information is available about the community composition of AMF under natural conditions in soils contaminated by antimony (Sb). The objective of this study was to investigate the characteristics of AMF molecular diversity, and to explore the effects of Sb content and soil properties on the AMF community structure in an Sb mining area. Four Sb mine spoils and one adjacent reference area were selected from around the Xikuangshan mine in southern China. The association of AMF molecular diversity and community composition with the rhizosphere soils of the dominant plant species was studied by Polymerase Chain Reaction-Denaturing Gradient Gel Electrophoresis (PCR-DGGE). Results from all five studied sites showed that the diversity of AMF decreased with increasing Sb concentration. Principal component analysis (PCA) indicated that the AMF community structure was markedly different among these groups. Further redundancy analysis (RDA) showed that Sb contamination was the dominating factor influencing the AMF community structure in the Sb mine area. However, the multivariate analysis showed that, apart from the soil Sb content, extractable nitrogen content and organic matter content also attributed to AMF sequence distribution type. Some AMF sequences were only found in the highly contaminated area and these might be ideal candidates for improving phytoremediation efficiency in Sb mining regions. Gene sequencing analysis revealed that most species were affiliated with Glomus, suggesting that Glomus was the dominant AMF genus in the studied Sb mining area.     

丝状真菌基因功能研究的方法

近年来不少丝状真菌全基因组测序已完成或正在进行,基因功能研究成为真菌研究的一个热点.多种基因功能研究方法都已应用到丝状真菌领域,为丝状真菌的基因功能研究提供了许多不同的技术策略.本文总结了目前丝状真菌基因功能研究中常用的方法,如转座子标签法、基因敲除技术、RNA干扰、超表达及酵母杂交系统等,并对各方法在丝状真菌研究中的优缺点进行了阐述.参42     

松材线虫PCR标准化阳性对照构建及检测体系的建立

建立了松材线虫PCR检测标准化阳性对照及特异性强的PCR检测体系.根据松材线虫rDNA-ITS区和BxPe12基因的特异基因序列设计引物,并从中筛选出一对特异引物cqubs01/cquba01,该引物能从松材线虫特异性扩增出196 bp片段,而不能对其他种类线虫进行扩增.基于优化PCR反应体系和反应程序,稳定的检测体系得以建立,检测灵敏度为100 ps/μL.以松材线虫基因组DNA为模板,以上述特异引物进行PCR扩增,将纯化后的PCR产物与PMD18-T载体连接之后转入大肠杆菌中,筛选出阳性克隆进行测序验证,最终获得了松材线虫的无害化阳性对照,建立了松材线虫标准化阳性对照的PCR检测体系.对来自于不同地区的12批次近100个样品进行了实际检测验证,其结果与实际发生情况一致,说明本检测体系稳定可靠.图3表2参8     

Recyling manganese-rich electrolytic residues: a review

Environmental Chemistry Letters - Huge amounts of manganese-rich solid residues are yearly produced worldwide by industrial electrolysis, calling for advanced methods of recycling in the context of...     

铈锆固溶体负载LaCoO_3催化碳烟的性能和表征

用柠檬酸法制备了铈锆固溶体负载不同量LaCoO3的催化剂。用热重法测试了催化剂样品对碳烟的催化活性。采用程序升温还原法(H2-TPR)、BET、X-射线衍射仪(XRD)和X-射线光电子能谱仪(XPS)对催化剂进行了测试。结果表明,铈锆固溶体表面形成了稳定的LaCoO3钙钛矿相结构;负载量为30%LaCoO3的催化剂具有最高的催化活性,起燃温度降到530℃;催化剂的催化活性与催化剂还原峰强度以及催化剂表面氧物种OII的含量紧密相关。